color

Tuesday's Tips: Happy Halloween!

Happy Halloween!  Every Halloween the area around my Boston studio is filled with hundreds of trick or treaters.  I am not really sure where they all come from, but it's great fun to stand outside my studio with a bowl of candy, a camera and a strobe. 

Here are tips to shoot Halloween!

Drag the shutter!
I love shooting  photographs that are a mixture of ambient light and strobe. Start your exposure with the element you can not control, that being the available (ambient) light.  Set your camera meter on manual exposure and your strobe on TTL.  Meter off the available light and use the strobe to fill in.  Due to darkness and very little available light you will be able to hand hold your camera at a much slower shutter speed than you normally would.  That slow shutter speed enables you to record what little there is.  The speedlight will fill in where you want it. 

This is a strobe on camera camera image. I used a slow shutterspeed and moved my camera from right to left.  The Green light is from glow sticks which the kid was holding while trick or treating.  My settings for this image was 1.6 seconds,  f4 ISO 200.


Speedlight off camera!
I held my speedlight lower left.  Light coming from lower angle gives you eerily feeling, perfect for Halloween!  My camera was set on manual to read the ambient light (candle in this case) using the in-camera meter.  My exposure for this shot was  2.5 seconds, f4. ISO 200.  I used a Pocket Wizard Plus III to fire my strobe. 


Get Low!
Get low and use your foreground!  I used in the camera meter to read the  exposure from the sky.  I  held my speed light off to the left and triggered it with a Pocket Wizard Plus III.


Get High! 
Get high and use your foreground!  


Wait for dusk
Wait till dusk to start shooting!  This was strobe on camera, with the head of the strobe at a 45 degree and bounced through a cube.  


Play with focal length of your lens

Shot with a 16mm fisheye.


Shot at 50mm

 

007.JPG

Shot at 70mm


Don't be afraid to get close.... I'm sure they won't bite...

 

Happy Halloween! May everyone have a safe and fun Halloween!  

This image is from my hands-on Location Lighting Workshop! 

Come join me for lighting and laughing,  upcoming workshops info here

Tuesday's Tips: A Slice of Orange!

I always carry a slice of orange in my camera bag.  Don't you?  

You do realize I am talking about an orange gel, better known as a CTO, (Color Temperature Orange). Similar to the other orange, this orange has several uses.

It’s amazing what a little orange can do!  You can bring out high lights in your subject’s hair and change gray skies to blue.

This photograph was shot during a lighting demo at Photo Plus 2016 in New York.  The main light was Dynalite Baja B6 with a Dynalite Grand Softbox. The hairline light was a Dynalite Baja B4 with a 20 degree grid with a Rosco CTO color gel. The shooting space was about 10 ft x 7 ft., proving you can work in a really small space!   Main light was about 2.5 feet from the mode while the backlight was about 2 feet behind.  The orange light give her a halo!  I used the Dynalite Baja dedicated transmitter to fire the strobes and a Sekonic L478DR light meter to read my light.

 

 

 

This photograph was shot during my Location Lighting UK Tour sponsored by SWPP. (I'll be leading 3bworkshops at their convention in London this January).  So... It was a rainy grey day in Caerphilly, Wales, UK, what are the odds?  Have you ever set your camera on tungsten and gone outside to shoot? What happens? Your photograph turns out blue!  So use this to your advantage on a cloudy day. Set your camera white balance to tungsten, and place a Rosco CTO orange filter over the flash. A CTO filter is a color correction filter, converting your speed light, which is balanced for daylight, to tungsten. You color correct the skin tones of your subject while your background turns blue.

The model is lit by a speedlight with a CTO gel in front of it, shot through a soft box on the right side, with a reflector on the left.  The output of the speedlight is tungsten, which matches my camera setting.  Because of this, the model has proper skin tones and the background is now blue.  To determine the exposure, the camera is set on manual and use your camera meter to read the "Element you cannot control":  In this case it is the ambient light on background.  

 

Rosco CTO gels and Cinefoil, along with 22 other gels are included in my "Rosco Location Lighting Kit" (wink wink!) 

 

Here is my upcoming workshop schedule for the next a few months.  Come join us!

December 9-11, 2016
New Jersey Camera Show at Unique Photo

January 11-14, 2017
SWPP Convention in London, UK

January 28, 2017
Location Lighting Workshop at Unique Workshop

February 7-9, 2017
WPPI, Las Vegas

March 4, 2017
Boston Center for Adult Education

March 25, 2017
Harwin Camera, New York City

March 31-April 2
CanAm Photo Expo, Buffalo, NY


 

Tuesday's Tips: Lighting the Show!

I had a great time at Photoplus 2016 in New York!  I shot this image during one of my 12 lighting demonstrations. To light this photograph I used 3 Nissin flashes. The main light shot through Rogue Flashbender XL, the hairline light was shot through Rogue grid, placed directly behind her head to backlight her.  The background pattern was created by shooting the flash through a pattern cut out of Rosco Cinefoil and colored using Rosco gels (from my Rosco Location Lighting Kit!). I shot this on a Nkon D800 with a Lensbaby Velvet 56 lens at 1/160 second at f4, ISO 100. I later converted the image into Black and White with Adobe Lightroom.  This image was a hard choice between color and black and white.  Each has a very different feel.

 

Equipment Used:
Nikon D800
Lensbaby Velvet 56 lens
3 Nissin 700 A flashes with portable battery
Nissin transmitter
Expoimaging Rogue Flashbender XL
Expoimaging Rogue grid
Rosco Cinifoil
Rosco color gels
Sekonic D478 Light meter
3 Lightstands
3 Manfrotto Umbrella adapters
1 Manfrotto Spring Clamp
1 Manfrotto Super clamp

I used Tethertools to connect to the display during PhotoPlus.

 

 

 

Below is a photograph that shows you what the room looks like without my light,  This was not shot in a fancy studio but in a small space on a trade show floor.   I underexposed ambient light by having low ISO and fast shutterspeed. Without my lighting, the frame looks like a blank empty canvas.  You add and control your light to set the mood and feeling of your photograph.   That, is the magic of lighting!

Tuesday's Tips: Happy Halloween!

Happy Halloween!  Every Halloween the area around my Boston studio is filled with hundreds of trick or treaters.  I am not really sure where they all come from, but it's great fun to stand outside my studio with a bowl of candy, a camera and a strobe. 

Here are tips to shoot Halloween!

 Drag the shutter!
I love shooting  photographs that are a mixture of ambient light and strobe. Start your exposure with the element you can not control, that being the available (ambient) light.  Set your camera meter on manual exposure and your strobe on TTL.  Meter off the available light and use the strobe to fill in.  Due to darkness and very little available light you will be able to hand hold your camera at a much slower shutter speed than you normally would.  That slow shutter speed enables you to record what little there is.  The speedlight will fill in where you want it. 

This is a strobe on camera camera image. I used a slow shutterspeed and moved my camera from right to left.  The Green light is from glow sticks which the kid was holding while trick or treating.  My settings for this image was 1.6 seconds,  f4 ISO 200.


Speedlight off camera!
I held my speedlight lower left.  Light coming from lower angle gives you eerily feeling, perfect for Halloween!  My camera was set on manual to read the ambient light (candle in this case) using the in-camera meter.  My exposure for this shot was  2.5 seconds, f4. ISO 200.  I used a Pocket Wizard Plus III to fire my strobe. 


Get Low!
Get low and use your foreground!  I used in the camera meter to read the  exposure from the sky.  I  held my speed light off to the left and triggered it with a Pocket Wizard Plus III.


Get High! 
Get high and use your foreground!  


Wait for dusk
Wait till dusk to start shooting!  This was strobe on camera, with the head of the strobe at a 45 degree and bounced through a cube.  


Play with focal length of your lens

Shot with a 16mm fisheye.


Shot at 50mm

 

007.JPG

Shot at 70mm

 

Don't be afraid to get close.... I'm sure they won't bite...

 

Happy Halloween! May everyone have a safe and fun Halloween!  

This image is from my hands-on Location Lighting Workshop! 

Come join me for lighting and laughing,  upcoming workshops info here

Tuesday's Tips: A One Day Assignment

Happy Summer Shooting!

I  recently worked on a wonderful assignment  shooting photographs to promote a new upscale seniors condo project  located on the water, north of Boston. The main challenge with this project was that  the complex has yet to be built.  My job was to sell a development that didn't exist yet.  How do you do this? You sell a life style.  I had one scouting day and one shooting day to produce the photographs.  The scouting day was spent with the client to determine locations and discuss concepts, create a timeline the shoot and work with a model agency to select models for the projects and shoot.  Most of my work is editorial, this is not!

I shot 14 situations in a  day using a total of 15 models. On a shoot like this, everything has to be scripted.  There is only a limited amount of time for each situation and you try not to keep the models overtime.   It is essential, you move quickly and your lightings has to be extremely mobile as well as produce the look of light you are after.   I worked with a self contained 400WS Dynalite Baja strobe and a Chimera softbox.  The combination is very portable, being hand held most of the time while  giving me beautiful light with a fast recycling time.  On those mid day shots, this combination is perfect for over powering hash summer light. ( you can also read on how to deal with harsh sunlight on my blog; Controlling the Sun!)

When mixing strobe and ambient light, I set my camera on manual and expose for "the element you cannot control" which was often the sky.  I used the in-camera meter to determine my ambient reading and Sekonic 478R Light Meter to determine the strobe output.  I could use the Sekonic to read the ambient light, I just didn't.  I also used a polarizing filter to bring out the sky and an ND filter, to control my choice of Fstop.

 

Be spontaneous! We did not plan for a dog!

 

 

 

During  the final shoot of the day, a cocktail party, we were after the feel of late afternoon light.
The problem here was the back of the house was in shade.  To get the effect of warm light, 
I used a Rosco full CTO (color temperature orange) filter over the two Baja strobes used to light the photograph. I used a 30 degree grid to control the light.  The Rosco CTO filter is one of 26 filters in my "Rosco Location Lighting Kit by Rick Friedman

For 1 day shooting, it is difficult to produce 14 situations and one has to be very efficient and move quickly.  Know your equipment, and travel light. It's a lot of work, but a great way to spend a summer's day.   I got to ride on a boat to celebrate a great shoot and work with wonderful people.  Happy Summer Shooting!

Upcoming Location Lighting Workshop Schedule.  Hope you can join us!

August 8-9
Unique Photo, Fairfield, NJ

September19 & 20
Hunts Photo, Providence RI

September 27-29
Berkshires Workshop, North Adams, MA ( Please email me for registration and more info)

October 17 & 18
Hunts Photo Portland, ME

Tuesday's Tip: Lighting Hyunah

This week's Tuesday Tips is a photograph from my studio.  As a photojournalist and corporate photographer, I do the majority shoots on location, although I do use my studio for some assignments.  Quite often, I use my studio like my test kitchen exploring new lighting techniques and testing new equipment.  All of the light in this photograph was produced using 3 Speedlights and a plant!  Ok, I used some other equipment.

My wonderful model for this shoot is Hyunah Jang.  A superb photographer, now working in Hawaii. 

The main light in this photograph is a Nikon speedlight shot through a  Flashbender XL Pro Strip Diffuser.   The hairline light another  speedlight with  a Rogue Grid  and a 1/2 CTO orange gel on a boom overhead.  For the background we placed a third strobe on the floor behind the screen with a blue gel  and fired it through a plant to give us the pattern on the screen.  We  used a piece of foam core to bounce the light from the Flashbender back on to our model’s face.  ISO 125 Fstop 7.1 and Shutterspeed 1/100.  

This set up works in a really small space and with the exception of the screen and plant is really portable.   The end photograph just does not feel like it was shot in a  really small space.

 

    Gear used in this Shoot:

    Nikon D800
    Nikon 70-200 f2.8 zoom lens
    Nikon 3 Speedlights
    4 PocketWizard Plus III
    ExpoImaging Rogue XL Pro Strip Diffuser (main light)
    ExpoImaging Rogue Grid with gel (Hairline light)
    Rosco Blue gel (background)
    Formcore
    Manfrotto Justin Clamp (to hold a form core)

     

     



    Tuesday's Tips: Happy Chanukah!

    Happy first night of Chanukah!  The Festival of Lights.   For this week's Tuesday's Tips I thought I should light the lights.  Since it 's the first night, I lit the menorah with 1 speedlight. 
     

     

     
    I shot this photograph in my studio in Boston's South End using a single Nikon Speedlight shot through a Rogue Grid with a blue gel.  I put a Rogue Flashbender on one side of the grid to further narrow the beam of light from the Speedlight giving me drop off on the light in the foreground. 

    This photo is a mixture of available light and strobe,  when deciding on exposure for a photograph I always start my exposure with the element I can not control.  In this photograph that element is the light from the candle.  I used the camera's light meter, set on spot meter to read the light from the candle.  Below you can see what the image looked like with no strobe and with strobe, without the blue gel.

     

    The last part of the setup was moving the menorah so I had reflections in the base.

    The photograph was shot with a Nikon D-800 and a Nikon 105 Macro lens, Rogue grid set, Rogue flash bender, Pocket Wizard TT5 & TT1.  The menorah was on a black velvet backdrop.  The velvet did not reflect any light, giving me the total black background.

     

    Shalom, May Peace be with everyone this holiday season! 

    Upcoming Workshop:
    2015
    January 14-18, 2015
    The Societies Photographic Convention.  London, UK

    January 16
    SWPP Lighting on Location. London, UK

    January 17
    SWPP A Day at the Asylum. London, UK

    January 18
    SWPP Location Lighting Workshop Demonstration. London, UK

    February 7, 2015
    Hunts Photo, Portland, Maine

    February 19
    Stonybrook Camera Club Evening Lecture 

    February 27
    Horizon Photography Summit  Wilmington, DL

    March 2-5
    WPPI 2015

    March 21-23
    Can-Am Photo Festival Amherst, NY

    March 24
    Gateway Camera Club Evening Lecture

    March 31 -April 1
    New England Institute of Professional Photography: 2 day Location Lighting Workshop

     

    Tuesday's Tips: "Throwing Colors at the Wall" with my new Rosco Location Lighting Kit

    I'm excited to announce that Rosco is releasing the new version of the  "Rick Friedman Location Lighting Kit" at PhotoPlus Expo in NY this week. Lots of color gels, Toughspun & Cinefoil,  I'll be demonstrating the new kit at the Rosco booth on Friday 10/31.  Booth 165.  

    If you look in my camera bag, you will  find a plastic bag of Rosco color gels, Toughspun and Cinefoil, in various sizes that I use for my assignments. I use the gels to color correct and create interesting light  while the Cinefoil helps me control the light and the Tough Spun helps softens the light.  All these fit in a small bag!  

    The beauty of working with Rosco Cinefoil and color gels is you can make a boring background into interesting one!  The model is leaning against the brick wall outside the studio.  By adding the color gels shot through holes in the Cinefoil, I was able to project the colors on the wall.  Before the cover shoot we cut a pattern out of a sheet of Rosco Photofoil and taped pieces of different color gels over the holes in the Cinefoil.  My background light was a Nikon speedlight blown through the colored cut out to project interesting patterns on the bricks.   I used a speed light for my background because I wanted to have the pattern to come out clear: a smaller light source will gives you harder edge.  My main light was Dynalite Uni with a grid and Rosco Toughspun.  I used a sheet of Cinefoil to direct my main light to create the feeling of a spot light on my model.  The Uni strobe  was powered by a portable Jack Rabbit battery and both strobes were fired using PocketWizard Plus IIIs.

    This is a strobe photograph, with no ambient light.  I used Sekonic 478 Lightmeter to read the strobe output.  My exposure for this shot was 1/250 second, f5 at ISO 80.

     

    Equipment used for the cover shot are:
    Lots of Rosco color gels
    2 sheets of Rosco Cinefoil
    Dynalite Uni with a grid and
    Rosco Toughspun
    Nikon Speedlight
    PocketWizard Plus III
    Sekonic Lightmeter 478
    Nikon D800

    Thank you Eve Eliseeva for being a wonderful model!

     

    I will be doing a series of lectures and live demos throughout PhotoPlus 2014 Expo at Javtis Center in New York City. 

    Thursday October 30
    Noon-12:30 California SunBounce PhotoPlus Show Floor Theatre
    1:30- 2:15 Unique Photo Booth #937

    Friday Oct 31
    ROSCO Booth #165

    Saturday Nov 1
    12:30 – 1:15 ExpoImaging Booth #134
    2:30 – 3:15 Unique Photo Booth #937

    I will discuss "how-to" on my lighting from my photo assignment, a lot of gear talk as well as fun behind the scenes stories. If you are planning to be there, come say hi!

    Tuesday's Tips: Shooting Colorado!

    A few weeks ago I traveled through Colorado from Denver to the Telluride Photo Festival.  I had the honor to teach two Location Lighting Workshops and presented two lectures; one on location lighting and one on my career as a photojournalist.  While in Denver, I went to the Denver Botanic Garden to view the Chihuly exhibit. It was amazing!  In Boulder, I stopped off at Chimera Lighting to see where my softboxes are created.  The next day, I headed to Colorado Springs to visit a great photographer and friend, Allison Ernest.  After Colorado Springs, I had an amazing drive across the beautiful state.  

    Here are a few photographs from the trip:

    Location Lighting Workshop attendee, Mark Burrows, modeling in front of a gray backdrop. This gray backdrop was colored using blue Rosco gels, with a pattern created by shooting the strobe through Rosco CineFoil with holes cut into the CineFoil.

    The setup for the above photograph:  The main light is a Dynlite Uni 400 with Rosco ToughSpun over the strobe to soften the light.  The background light is a Nikon Speedlight SB900 with gels and Cinefoil.
    I used a Sunbounce MicroMini reflector to bounce back some of the light.

    Here, we have moved outside the studio and are using a Dynalite Baja strobe with a Chimera beauty dish as our light modifier.  In this photograph we are using the strobe and beauty dish to control the light on the model's face while initially exposing for the background.  Each of the students had a PocketWizard PlusIII on their camera to fire the strobe.  The Baja recycled fast enough for every student to work off one strobe.

    Here is our set up at the beginning of Colorado Avenue in Telluride.  My friend, and an amazing photographer, Marla Meredith is modeling for us.  We are using the Dynlite Baja and the Chimera Beauty dish to light the model's face and balance the background light.

     

    Back in the studio, this was lit using a a Speedlight and with a large Flashbender as the main light and Rogue Grid set as the hairline light.  Thank you Carin Somers for being a wonderful model!

    The Chihuly exhibit at the Denver Botanic Garden in Denver.  This is amazing art and light.

    Sunrise over Garden of the Gods in Colorado Springs.  Yes, I really did get up early enough to photograph a sunrise!

    Hanging out with Eileen Healy at Chimera in Boulder, where all my soft boxes are born!

    Reflections over the Box Canyon in Telluride. This town is a photographer's playground!

    Sunset over the hills above Telluride.

    Star trails over Telluride.  The exposure on this image 1221 seconds at f16, ISO 100.  The light on the mountains and the forest is from an almost full moon.

    Telluride, CO

    Telluride, CO

    Time to leave Colorado and head for New York to PhotoPlus!

    Leaving Telluride...  Next stop... New York for PhotoPlus. I'll be presenting my Location Lighting for Rosco, where we will be introducing my new Location Lighting Kit.  I will also be at Shoot NYC for SunBounce, at the ExpoImaging booth and at Unique Photo.  Hope to see you there!

    PhotoPlus Schedule

    Thursday  October 30
    Noon-  California SunBounce #245
    1:30- 2:15  Unique Photo Booth #937

    Friday  Oct 31
    ROSCO Booth #165

    Saturday Nov 1
    12:30 – 1:15  ExpoImaging Booth #134
    2:30 – 3:15  Uniqu Photo Booth #937

    Tuesday's Tips: Creating Backgrounds With Cinefoil, Gels And Scissors!

    This week's Tuesday Tips is a series of photographs from my studio.  As a photojournalist and corporate photographer, I do the majority of my work on location, although I do shoot some assignments in my studio.  Quite often, I use my studio as my test kitchen, exploring new lighting techniques and testing new equipment.   We were working with the idea of creating unique patterns with color on a plain white backdrop using Rosco gels, and Cinefoil, which is black tinfoil.  What we were able to create, using similar lighting setups, and minor changes in the lighting, resulted in a totally different look in the background. 

    Three lights were used with all three photographs below.  A main light on the model, a hairline light, and a backlight on the backdrop.  To create the pattern on the background, we cut holes in piece of Cinefoil and shot a strobe with a blue gel through it. The effect of lighting these images with Speedlights verses Dynalites are vastly different. 

    The large light source will give you a softer light, while the speedlght, a smaller light source, will give you a harsher light effect.

    Lighting setup and gear used:  
    Nikon D800 camera
    Nikon 70-200 f2.8 lens
    3 strobes (Speedlights & Dynalite)
    Rosco Cinefoil
    Rosco CTO (orange gel)
    Rosco blue gel
    Rosco Tough Spun
    Reflector
     Pocket Wizard Plus III, TT5 
    Light Meter (I use Sekonic 478 DR)
    Chimera Softbox
    Manfrotto light stands
    Boom (to hang a piece of Cinefoil)
    Clamps

    This diagram shows the basic setup.  I used different lights to achieve different visual effects on my images.  I used Sekonic 478 DR Lightmeter.  All strobes were fired using PocketWizard.  When adding colors to your photographs with gels, it is important that your white light does not hit the colored areas, as the white light will blow away your colors.

    Dynalite setup:
    My main light was a Dynalite with a Chimera Softbox.  My hairline light was another Dynalite head with a grid and a Rosco full CTO gel.  The background light was shot through custom cut Cinefoil with a Rosco blue gel.

    set up

    set up

    Speedlights and softbox setup:
    All lights for this setup were Speedlights.  The main light I used was a Nikon SB900 with Chimera Softbox as a light modifier.  The background light on the white backdrop was Nikon SB900 with Rosco blue gel with a custom cut Rosco Cinefoil.  For the hairline light, I used another Speedlight.  I put Cinefoil around the Speedlight to make a snoot, so that I can direct the light to only illuminate her hair.

    Notice the drastic difference on the background pattern between the Speedlight setup and the Dynalite setup. This is because of the size of light source in relation to size of Cinefoil.  The smaller the light source, harder the edge of the shadow.  
    I prefer to use a Chimera Softbox for the high quality of a light, for easy set up, and for its compact size for easy travel.

    Speedlight and Cinefoil
    You can create a very nice hard light with Rosco Tough Spun and Rosco Cinefoil.  This is an all Speedlight setup.  The main light on the model's face is a Speedlight with Cinefoil to control its direction, and Rosco Tough Spun to soften the light.  If you compare this light with the light through a Softbox, the edge of shadow is much harder.  I also rotated the sheet of Cinefoil to change the background pattern.

     

    My assistant, Keiko, created this heart shaped pattern cut out of Cinefoil.  This is a Dynalite setup.  My main light on the model's face is a Dynalite with grid.

    1406668181995.jpeg

    Thank you to Hyunah Jang, who is also a wonderful photographer, for being a model for this shoot!

    The Gels, Tough Spun, and Cinefoil I use, are all included in the Rosco Rick Friedman's Location Lighting Kit available for purchase at my Location Lighting Store here.

    To learn this lighting technique and many others, come join me for a three day Location Lighting Workshop at Telluride Photo Festival in beautiful Telluride, CO on September 29th - October 1st, 2014. It will be fall foliage time!  

    A Day at the Asylum in London!  This will be a very fun workshop to be sure! I am teaching during the Societies Photographic Convention in London, UK on January 16th trough 18th, 2014. ( The Asylum workshop in on January 17th)

    The workshops will cover use of Speedlights and Studio strobes with various light modifiers and gels.  We hope you can join us for one of the hands on workshops.  

    Please visit my website for a complete list of upcoming workshops.