dynalite baja

Tuesday's Tips: A Slice of Orange!

I always carry a slice of orange in my camera bag.  Don't you?  

You do realize I am talking about an orange gel, better known as a CTO, (Color Temperature Orange). Similar to the other orange, this orange has several uses.

It’s amazing what a little orange can do!  You can bring out high lights in your subject’s hair and change gray skies to blue.

This photograph was shot during a lighting demo at Photo Plus 2016 in New York.  The main light was Dynalite Baja B6 with a Dynalite Grand Softbox. The hairline light was a Dynalite Baja B4 with a 20 degree grid with a Rosco CTO color gel. The shooting space was about 10 ft x 7 ft., proving you can work in a really small space!   Main light was about 2.5 feet from the mode while the backlight was about 2 feet behind.  The orange light give her a halo!  I used the Dynalite Baja dedicated transmitter to fire the strobes and a Sekonic L478DR light meter to read my light.

 

 

 

This photograph was shot during my Location Lighting UK Tour sponsored by SWPP. (I'll be leading 3bworkshops at their convention in London this January).  So... It was a rainy grey day in Caerphilly, Wales, UK, what are the odds?  Have you ever set your camera on tungsten and gone outside to shoot? What happens? Your photograph turns out blue!  So use this to your advantage on a cloudy day. Set your camera white balance to tungsten, and place a Rosco CTO orange filter over the flash. A CTO filter is a color correction filter, converting your speed light, which is balanced for daylight, to tungsten. You color correct the skin tones of your subject while your background turns blue.

The model is lit by a speedlight with a CTO gel in front of it, shot through a soft box on the right side, with a reflector on the left.  The output of the speedlight is tungsten, which matches my camera setting.  Because of this, the model has proper skin tones and the background is now blue.  To determine the exposure, the camera is set on manual and use your camera meter to read the "Element you cannot control":  In this case it is the ambient light on background.  

 

Rosco CTO gels and Cinefoil, along with 22 other gels are included in my "Rosco Location Lighting Kit" (wink wink!) 

 

Here is my upcoming workshop schedule for the next a few months.  Come join us!

December 9-11, 2016
New Jersey Camera Show at Unique Photo

January 11-14, 2017
SWPP Convention in London, UK

January 28, 2017
Location Lighting Workshop at Unique Workshop

February 7-9, 2017
WPPI, Las Vegas

March 4, 2017
Boston Center for Adult Education

March 25, 2017
Harwin Camera, New York City

March 31-April 2
CanAm Photo Expo, Buffalo, NY


 

Tuesday's Tips: Leaping for Light!

I had a recent assignment to photograph ultimate Frisbee Player Tulsa Douglas.  As with most of my magazine assignments the only info I was given was her name, contact info and why they are doing a story on her.  The rest is up to me to figure out.   I knew I wanted photograph her at dusk throwing and catching.  First challenge was the location, I knew I needed at large open space to shoot.  The second challenge was the lighting.  I knew the lighting on this shoot would be a mixture of strobe and ambient light. 

For strobes I used 2 Dynalite Bajas.  These are 400watt seconds self contained strobes. On the main light, I used a Dynaite Beauty Dish.  For a light modifier on the other Baja I used a Chimera strip light and a grid, to create rim light.   To determine my exposure I set my Nikon D810 on manual and using the in camera meter I take a meter reading off the sky and underexpose one stop to get deeper color.  Using my Sekonic light meter, I set my strobes to give me the same f stop as the reading off the sky.  As the ambient light drops, I slow my shutter to keep my exposure the same.  Tulsa would be silhouetted, without strobes. 

Check out the behind the scenes video below! 

Thank you, Colby Todisco for creating the video!